Apple PC Compatibility Card 7-inch card - Manual (Page 183)

6 To adjust screen centering for the selected resolution, change the size and position of
the box; then press Enter.
7 Repeat steps 2–3 until you are satisfied with the screen centering for all the resolutions
supported by your monitor.
8 Exit and save your settings.
If you want to cancel your settings, press the Esc key and confirm as
prompted.
Installing custom video drivers in DOS
The ATI software includes custom video drivers for a variety of DOS
applications. To install the drivers, follow these steps:
Installing drivers for Intergraph MicroStation 4.0, 5.0
Before you begin, ensure that MicroStation is properly installed on your
system.
1 Start the Install program.
To start the program, insert the PC Utilities CD into the CD-ROM drive
and type:
CD E:\VIDEO\DRIVERS\INSTALL <enter>
INSTALL <enter>
The main menu appears.
2 Select Drivers Installation from the menu.
A list of applications appears.
3 From the list of applications, select MicroStation.
4 Enter the pathname for MicroStation.
5 Insert the disk as prompted.
A menu appears.
176 Appendix C