Apple Cinema Tools 3 - Manual (Page 121)

Chapter 6 Preparing the Source Clips for Editing 121
Using Batch Reverse Telecine for Multiple Source Clips
Before you use batch reverse telecine to process multiple source clips, be sure to read
“
Preparing to Use Batch Reverse Telecine ” on page 119.
To use batch reverse telecine:
1 Place all the clips that you want to process into one folder.
2 Choose File > Batch Reverse Telecine.
3 In the dialog that appears, select any source clip file in the folder that contains the
source clips, then click Choose.
4 In the Batch Reverse Telecine dialog that appears, select the Capture Mode that
indicates the correct field capture for the clip.
 Field 1 Only: Select this option if the video contains only field 1.
 Field 2 Only: Select this option if the video contains only field 2.
 F1 - F2: Select this option if the video contains both fields, and field 1 is the
dominant field (the first field to appear).
 F2 - F1: Select this option if the video contains both fields, and field 2 is the
dominant field.
See “ Determining the Field Capture Information ” on page 114 for more information.
Select the field capture
information for this clip.
UP01101.Book Page 121 Thursday, March 10, 2005 3:16 PM