Apple Cinema Tools 3 - Manual (Page 154)

154 Chapter 8 Generating Film Lists and Change Lists
To export a change list:
1 In Final Cut Pro, select the new version of the sequence, then choose File > Export >
Cinema Tools Change List.
2 In the dialog that appears, select the program (.pgm) file that you saved when you
exported a list for the previous version of the sequence. (It contains needed
information about the previous sequence.)
3 In the Change List dialog that appears, configure the settings, then click OK.
See “ Settings in the Change List Dialog ” on page 156 for details.
When you select the lists in the “Include the following” area in the Change List dialog,
the change list file will include (in addition to the selected Change List Options) the
same content you would get if you were exporting those lists from the Film Lists
dialog.
Note: Keep in mind that the following settings should be the same for the two
sequences you are comparing: Film Standard, Telecine Speed, Show Key Code or Ink
Number, and “Start with 8 seconds of leader.” The two sequences also need to have the
same editing timebase (set in Final Cut Pro).
4 In the dialog that appears, enter a filename and choose a location, then click Save.
This lists provide
information about the
entire sequence.
These lists provide
information about
the changes.
UP01101.Book Page 154 Thursday, March 10, 2005 3:16 PM