Do you have what you need? 2, System requirements 2, Do you have what you need – Apple QuickTake 100 User Manual
Page 9: System requirements
Advertising
Do you have what you need?
Before you begin, unpack the QuickTake 100 package. Be sure you have the
items shown in this illustration:
System requirements
To use the QuickTake 100 camera with your computer, you need
m
a Macintosh with a 68020 or higher central processing unit (any Macintosh
except a Macintosh Plus, SE, Classic, Portable, or PowerBook 100)
m
system software version 7.0.1• (with Tune-Up 1.1.1) or a later version
m
4 MB of RAM with 8 MB of virtual memory or 8MB of RAM
m
an Apple SuperDrive (or any floppy drive that can read high-density disks)
m
a hard drive with at least 10 MB available
QuickTake 100 camera
Battery charger
Rechargeable NiCad
batteries
Serial cable
QuickTake software
Neck strap
2
Chapter 1
Advertising