BMW 01 41 0 155 307 - Manual (Page 45)

45 n
Index
Data
Technology
Repairs
Car care
Controls
Overview
Sliding/tilt sunroof
Automatic opening and closing
> Press the switch past the resistance
point: the sunroof travels to either the
fully-closed or fully-opened position.
> With the sunroof open, press the
switch briefly toward "Raise": the roof
will move into the end "Raise" posi-
tion.
Pressing the switch again stops opera-
tion immediately.
Safety feature
If the sliding/tilt sunroof encounters
resistance at a point roughly past the
middle of its travel when it is closing,
the closing cycle is interrupted and the
sunroof will open again slightly.
Despite this safety feature, be
extremely careful that the closing
path of the sunroof is not obstructed
whenever it is closed. Otherwise, trig-
gering the closing-force limitation may
not be ensured in some situations (with
very thin objects, for instance).
You can disable this safety feature by
pressing the switch beyond the pres-
sure point and holding it.
<
Power loss or malfunction
In the event of an electrical system
malfunction, the sliding/tilt sunroof can
be operated manually. Refer to
page
166 .
Online Edition for Part No. 01 41 0 155 307 - © 09/00 BMW AG