Check control, Clock, Adjusting knob for the clock – BMW 01 41 0 155 307 User Manual

Page 75: Indicator for check control

Advertising
background image

75

n

Index

Data

Technology

Repairs

Car care

Controls

Overview

Graphic display

The following information and/or condi-
tions are indicated using symbols,
starting with the ignition key position 2,
until the condition has been corrected:

1 Inspect the low-beam and high-beam

headlamps, as well as the side lamps

2 Door open

3 Tailgate open

4 Check brake and brake lamps

When you open the driver's door after
stopping with the lights still on, a
warning signal sounds for LIGHTS ON.

460de083

If you wish to have a permanent time
display, you can make this adjustment
in the radio display (refer to the Radio
Owner's Manual).

You can adjust the clock and the time
display in the car radio as follows.

Adjustments

From ignition key position 1

To set ahead: turn the right button to
the right.

To set back: turn the right button to the
left.

The adjustment speed will increase the
longer you continue to hold the button
turned to the left.

To change the display mode: press the
knob briefly.
Every time you press the knob, the
clock display alternates between the
12-hour or 24-hour mode.

In ignition key position 0:
The time is displayed for a few seconds
after you press the left button (refer to
"Odometer" on page

73

).

460us078

Check Control

Clock

Online Edition for Part No. 01 41 0 155 307 - © 09/00 BMW AG

Advertising