Apple QuickTake 150 (for Windows) - Manual (Page 48)

Erasing images from the camera
After you transfer your images to your computer, you should erase them from
the camera to make room for new images.
If the camera is connected to your computer, there’s another way to
erase images. You can open the QuickTake program and choose Camera
Controls from the Camera menu. Then click the Erase All button on the
computer screen.
WARNING This erases all of the images in the camera. You cannot erase
a few and leave the rest in the camera.
To erase all the images in the camera,
lightly press the Erase All button.
(Use any small, pointed object.)
As the images are erased, the Trash icon in the
control panel display blinks. In a few seconds,
the display shows 0 (zero) images captured.
40 Chapter 3