Apple QuickTake 150 (for Windows) - Manual (Page 55)

The Camera menu
The commands in the Camera menu work with the camera. You must connect
the camera to your computer before you can use this menu. (For instructions
on connecting the camera to your computer, see Chapter 3.)
View Slides in Camera
Lets you see slides of the images currently in the camera.
Move All Camera Images to Disk
Transfers images from the camera to your computer. When you choose
this command, a dialog box appears that lets you specify where to save
the images.
Set Camera Name
Brings up a dialog box that lets you give a unique name to your camera.
This is especially helpful if more than one camera may transfer images to a
particular computer.
Set Camera Date & Time
Brings up a dialog box that tells you whether the clock needs to be reset to
match your computer. If it does, click OK.
Camera Controls
Brings up a dialog box like the controls on the camera.
47 QuickTake Software Menu Commands
To change the image quality, click here.
To turn on (or turn off) the timer, click here.
To change the flash
setting, click here.
To erase the images
in the camera,
click here. To capture an image, click here.