Apple PC Compatibility Card User Manual
Page 273
4
In the list of network cards that appears, select “Network card not shown in list below,”
then press Return.
5
Eject the disk and insert the floppy disk containing the NDIS2 driver. Press Return twice.
6
Insert the first disk again; then press Return.
7
Enter a machine name, user name, and domain name.
8
Follow the onscreen instructions to finish the installation.
9
Restart the PC.
10
Make sure your files contain the following lines:
PROTOCOL.INI
[network.setup]
version=0x3100
netcard=MacNDIS,1,MACNDIS
transport=ibm$netbeui,IBM$NETBEUI
lana0=MacNDIS,1,ibm$netbeui
[protman]
DriverName=PROTMAN$
PRIORITY=ibm$NETBEUI
[MACNDIS]
DriverName=MacNDIS$
ProtocolDot2=F0
[IBM$NETBEUI]
DriverName=netbeui$
SESSIONS=20
NCBS=20
BINDINGS=MACNDIS
LANABASE=0
CONFIG.SYS (the lines must be in this order)
DEVICE=C:\NET\PROTMAN.DOS /I:C:\NET
DEVICE=C:\NET\MACNDIS.DOS
DEVICE=C:\NET\DLSHELP.SYS
273
Installing Network Client Software