Step 8: configure the san, Step 8: configure the san – Apple Xsan 2 User Manual
Page 23
Chapter 1
Quick SAN setup
23
Xsan Controller Type: Select “Configure as Primary Xsan Metadata Controller.”
Network: Enable only the public Ethernet port (Ethernet 1 at the top of the list).
Choose a configuration method from the pop-up menu and enter the appropriate
settings for the client computer. See “What you need to know” on page 16.
You can choose:
Â
Manually, and enter the static public IP address, subnet mask, and router address for
the computer
Â
Using DHCP with manual address, and enter the computer’s IP address if your
DHCP server provides other TCP/IP connection settings
Users and Groups: Select “Manage users and groups with Xsan Admin.”
Step 8:
Configure the SAN
After basic server configuration and Xsan installation are complete, open Xsan Admin.
The Xsan setup assistant appears. Follow these steps to enter basic SAN settings.
Configure the SAN:
1
In the Introduction pane, click Continue.