Apple LaserWriter 12/640 PS - Manual (Page 31)

Step 1: Installing the printer software
IMPORTANT Do not “drag install” the printer software. If you do, the files
won’t be properly decompressed and won’t work.
Installing from the CD-ROM disc
1 Quit any programs you are running.
2 Turn off any automatic virus-detection programs you have on your computer.
If you don’t, problems may occur during the installation. After installation is
complete, you can turn the virus-detection programs back on. (For
instructions on turning off each virus-detection program, see the manual that
came with the program, or telephone the manufacturer of the program.)
3 Insert the Apple LaserWriter CD-ROM disc into the CD-ROM drive.
The disc’s icon appears on the desktop.
Note: Some systems require you to place the disc into a caddy before
inserting it into the CD-ROM drive.
4 Double-click the disc icon to open the disk, if necessary.
5 Double-click the MAC_OS folder, if necessary.
6 Double-click the SOFTWARE folder, if necessary.
7 Double-click the INSTALL folder, if necessary.
8 Read the Before You Install file to check for late-breaking news.
9 Double-click the Installer icon to start the Installer program.
After a moment, a Welcome dialog box appears.
10 Click Continue.
After a moment, the Install dialog box appears. At the top of the dialog box is
a pop-up menu set to allow you to perform an Easy Install.
Easy Install installs all the software you need. It installs the LaserWriter 8
software, the Desktop PrintMonitor, and the Apple Printer Utility.
Custom Install lets you specify what portions of the software you would like
to install.
31 Setting Up the Printer for Mac OS Users