Apple AirPort Extreme 802.11n (2nd Generation) - Manual (Page 8)

8 Chapter 1 Getting Started
 Mac OS X v10.4 or later
 AirPort Utility 5.2 or later
To set up AirPort Extreme using a Windows PC, you need the following:
Â
A Windows PC with 300 MHz or higher processor speed and a compatible 802.11
wireless card
 Windows XP Home or Professional (with Service Pack 2 installed) or Windows Vista
 AirPort Utility v5.2 or later
Plugging In AirPort Extreme
Before you plug in your AirPort Extreme, first connect the appropriate cables to the
ports you want to use, including:
Â
Connect the Ethernet cable that is connected to your DSL or cable modem (if you will
connect to the Internet) to the Ethernet (WAN) port (<
).
 Connect a USB cable connected from the USB port (d ) on AirPort Extreme to a
compatible USB printer (if you will print to a USB printer), a hard disk, or a hub.
 Connect an Ethernet cable from any Ethernet device to the Ethernet LAN ports (G ).