Apple Express Fax/Modem User Manual
Page 139
S95 Error control negotiation message option
32
4/8/32
Bits
A bit map to enable different result codes. Linked to ATW when ATW=1.
Bit
Value
Meaning
0–1
1
Not used.
2
4
Enables CARRIER messages only.
3
8
Enables CARRIER+PROTOCOL
messages only.
4
16
Not used.
5
32
Enables CARRIER+PROTOCOL+
COMPRESSION messages.
T
Enable tone (DTMF) dialing Sets the default dialing mode to
Touch-Tone mode. Can be used in dial string (default).
V
n Verbalize The V command allows you to choose how result codes are
displayed: as code numbers or as English words. Unless these messages
are being read by a program that does not easily recognize strings of
characters, the default setting (V1) is recommended.
0
Displays result messages as code numbers (non-verbal).
1
Displays result messages as English words (verbal).
127
M
O D E M
C
O M M A N D
S
E T