Apple Express Fax/Modem - Manual (Page 20)

Connecting your Macintosh
To link your Macintosh to your telephone line, connect one end of the
telephone cord to your Macintosh and the other to your telephone line.
1 Make sure that your computer is turned off.
2 Locate the internal modem on the back of your computer (RJ-11 receptacle).
3 Plug one end of the cord into your computer’s internal modem jack receptacle.
Note: The Internal Modem port in your CPU may be different than the port
pictured above.
4 Plug the other end of the cord into your telephone wall jack.
If a telephone is plugged into the jack you want to use, unplug your telephone
cord from the jack.
Note: Before attempting to use your modem over the telephone lines, make
sure the modem is properly connected.
Internal Modem port icon
Internal Modem port
jack receptacle
Modem connector (RJ-11)
8 C H A P T E R O N E