Apple Using WaveBurner Logic Pro 7.1 - Manual (Page 30)

30
Moving Track Start Marker and Pause Start Point Separately
You can move the track start marker and pause start point separately, thereby
changing the pause length in the process.
To move a track start and pause start point separately:
1 Place the pointer directly over the track marker portion you want to move.
The pointer changes to a split track marker symbol.
2 Drag the marker portion—either track or pause—to the desired position.
Note: As long as there is no pause set (in other words, the track marker is still in one
piece), moving the right portion of the marker will move both. In this situation, move
the left portion to the left; this will split the track marker and create a pause. Following
this split of the track marker, either portion can be moved separately.
Automatic Positioning of Track Start Markers
Track start markers are repositioned automatically when regions are moved: In
overlapping regions, these are located at the center of the overlapping sequence. In
non-overlapping regions, a pause start is located at the end of the first region, and a
track start at the beginning of the second region.
If you manually change the marker positions, the automatic function is switched off.
If you have edited a track start marker manually, and want to move it to the automatic
position, release it as soon as a “chain” icon appears in place of the mouse cursor.