Apple Using WaveBurner Logic Pro 7.1 - Manual (Page 35)

35
Fat EQ
The Fat EQ plug-in lets you apply equalization using up to five fully parametric bands,
and provides great flexibility in shaping the sound of your projects. In the Fat EQ plug-
in window, the bands are arranged in increasing frequency order from left to right. The
buttons numbered 1 through 5 allow you to turn each band on or off. The circular
slider for each band lets you set the amount to increase (boost) or decrease (cut) the
signal level in that band. Dragging the number in the value field (located directly above
the slider) enables you to raise or lower the band’s frequency. You can set the amount
of resonance or “Q” for each band by dragging the number in the value field located
just above the on/off button.
Band 1 can function as a low cut or low shelving filter. Bands 2 and 4 can be switched
from their normal operating mode as fully parametric band pass filters to low or high
shelving filters. The center band (3) always operates as a fully parametric band pass.
Band 5 can function as either a high cut or high shelving EQ. You select the filter type
for each band by turning on or off the graphic button for the band located at the top
of the plug-in window, above the graphic display.