Apple WaveBurner 1.5 - Manual (Page 28)

28 Chapter 2 Getting Started With WaveBurner
 Play/Pause: Starts playback from the current position line location.
 Stop: Stops playback.
 Back: Scrubs (shuttles while audio is heard) towards the start of the project. Click-
hold on the button to operate.
 Forward: Scrubs (shuttles while audio is heard) towards the end of the project. Click-
hold on the button to operate.
To start playback, do one of the following:
m Click the Play button in the Transport (or press the Space bar).
m Double-click either time ruler to start playback from that point.
To stop playback, do one of the following:
m Click the Stop button (or press Space bar) in the Transport. A second click on the Stop
button (or pressing the Space bar) moves the position line to the beginning of the
project.
m Double-click either time ruler to stop playback and move the position line to the
clicked location.
Moving the Position Line
You can move the position line directly to any location.
To move the position line, do one of the following:
m Click once at the point you want to move the position line to—on either time ruler.
m Click-drag the position line to the desired point.
Selecting a region, track, or marker in the Track or Region lists sets the playback
position to the beginning of the region, track, or marker.
Looping Playback
You can loop (or cycle) a section of your project, so that it plays back repeatedly. This
can be useful when editing a part of the project, and you want to hear the results of
your edits in real time. You can loop playback by defining a cycle area in either time
ruler.
To define a cycle area:
m In either time ruler, drag from the desired loop start position to the point where you
want looping to end.
Click-dragging the cycle area handles allows you to resize an existing cycle area.
To remove the cycle area:
m Click anywhere outside the current cycle area in the time ruler. Note that this will move
the position line to the clicked point.