MBW CG200 - Manual (Page 36)

34
SWITCHING STEERING SENSORS:
1. When pouring in a straight line, use
the front steering sensor. CURVE
START
2. As the paver approaches a curve,
use the front sensor until the senĆ
sor reaches the beginning of the
curve.
3. When the front sensor reaches the
curve, flip the steering sensor seĆ
lector switch to manual (center
position).
4. Leave the selector switch in manuĆ
al until the rear steering sensor
reaches the beginning of the
curve.
5. When the rear steering sensor
reaches the curve, flip the selector
switch to the rear sensor.
6. The front wheel will turn sharply
and the mold will follow the
stringline accurately.
7. As the front sensor approaches the
stringline, the sensor wand will be
pushed back towards vertical.
When the front sensor wand reachĆ
es its original orientation, flip the
sensor selector switch back to the
front sensor position.