Lull 644B Operation Manual - Manual (Page 4)

ii
INTRODUCTION
INTRODUCTION
You are about to operate one of the finest forklifts available on the market today. To ensure that your forklift will
provide years of safe dependable service, only trained and authorized persons should operate and service the
forklift. It is the responsibility of the operator to read, fully understand and follow all operational and safety related
instructions contained in this manual. Do not operate the forklift until you have read and fully understand these
instructions. Remember, always use good safety practices to protect yourself and those around you.
REGISTRATION
The Warranty Registration card must be filled out by the dealer and returned to the
“Warranty Administrator” indicating the date the machine went into
service. The Pre-Delivery Inspection Form must be signed by the customer when the machine is delivered.
LULL ® has made every effort to provide information as complete and accurate as possible for its forklifts.
However, because of owner requirements, equipment and control variations may exist between machines. In
addition, due to
LULL ® policy of continually striving to improve its products, occasional discrepancies may exist
between machines and the descriptions and information contained herein.
LULL ® reserves the right to make changes and improvements to its products at any time without public notice or
obligation. LULL ® also reserves the right to discontinue manufacturing any product at its discretion at any time.
Copyright © 1997 LULL INTERNATIONAL, INC., St. Paul, MN. All rights reserved. This document may
not be duplicated, including electronic digitization, in whole or in part without the expressed written consent of
LULL INTERNATIONAL, INC.
IMPORTANT
This operators manual must remain with the machine at all times!