Operation – Lull 644E-42 Operation Manual User Manual

Page 63

Advertising
background image

Operation

61

Model 644E

Origin 3/04

Windshield Installation

IMPORTANT! Be sure the windshield retainer plate is secured in place after
installing the windshield back into the cab. Never operate the vehicle with the
windshield in place and the retainer plate missing.

1. With the seal bulb on the windshield toward the cab, place the top of the

windshield under the upper retainer (9). Push the windshield up as far as
possible.

2. Place the bottom of the windshield (4) into the windshield opening in the

cab. Secure the windshield in place with the lower retainer plate (8) and the
five capscrews (7). Tighten all five capscrews securely to hold the wind-
shield in place.

3. Remove the two nuts (6) from the wiper arm shafts. Reassemble the wiper

arm assembly (5) to the shafts and secure in place with the two nuts.
Reconnect the washer hose to the hose barb.

OU1010

6

4

5

7

8

9

Advertising