Lull 944E-42 Operation Manual - Manual (Page 114)

112 Model 944E Origin 3/04
General Maintenance
4. Locate the petcock (1) on the bottom of the radiator. Place a hose (2) onto
the petcock and channel the coolant into a container. Open the petcock
and allow the coolant to drain.
5. Flush the radiator with clean water and allow to drain. After radiator is
drained, close the petcock and remove the hose.
6. Transfer to used coolant to a properly labeled container and dispose of
properly.
7. Drain the contents of the overflow bottle (3) by removing the overflow hose
(4) from the radiator fill neck (5). Use the hose to channel the coolant into a
container. Transfer the used coolant to a properly labeled container and
dispose of properly.
8. Reattach the overflow hose to the radiator fill neck.
MU1390
2
1