Lull 944E-42 Operation Manual - Manual (Page 134)

132 Model 944E Origin 3/04
General Maintenance
B. Transfer Case Oil
Change
(First 100 Hour Intervals) and
(1000 Hour Intervals)
1. Place the vehicle on level
ground, ground the attach-
ment, level the vehicle side to
side, place the travel select
lever in the (N) NEUTRAL DETENT position, engage the park brake switch
and shut off the engine.
2. Clean the area around the transfer case oil fill/level plug (1) and the oil
drain plug (2).
3. Place a receptacle under the transfer case drain plug.
4. Remove the oil fill/level plug (1).
5. Remove the oil drain plug (2) from the transfer case (3).
6. Allow the oil to drain completely into the receptacle. Transfer the oil into a
container with a cover and label the container as used oil. Dispose of prop-
erly.
7. Clean and re-install the transfer case oil drain plug (2). Torque to 26 lb-ft
(35 Nm).
8. Fill the transfer case with oil through the oil fill/level plug hole (1). Fill until
the level is up to even with the oil fill/level plug hole The capacity is 1.7 qt
(1,6 liters). Refer to the chart on page 131 for oil recommendations.
9. Clean and re-install the oil fill/level plug (1). Torque to 26 lb-ft (35 Nm).
OU0550
1000
OH2690
100
OU0530
OU0810
1
2
3