Lukas SC 250 M - Manual (Page 6)

6
In the event of malfunctions,
immediately deactivate the
equipment and secure it. The
malfunction is to be repaired
immediately. Do not carry out any changes
(additions or conversions) to
the device without obtaining
the prior approval of LUKAS
Observe all safety and danger
notes on the device and in the
operating instructions. All safety and danger notes
on the device are to be
kept complete in a legible
condition.
Any mode of operation which
impairs safety and/or stability
of the device is forbidden! Comply with all specifi ed
dates or dates specifi ed in
the operating instructions
pertaining to regular controls /
inspections on the equipment.
Safety devices may never be
deactivated! The maximum permitted
operating pressure noted on
the equipment must not be
exceeded.
Before the device is switched
on/started up, and during its
operation, it must be ensured
that nobody is endangered by
the operation of the device. Only original LUKAS
accessories and spare parts
may be used for repairs.
When working close to live
components and cables,
suitable measures must
be taken to avoid current
transfers or high-voltage
transfers to the equipment. Please note, when cutting or
spreading: cutting, tearing
or breaking can cause
material falling down or being
catapulted away because of
sudden removal. Necessary
precautions need to be taken!
The build-up of static
charge with the potential
consequence of spark
formation is to be avoided
when handling the device. Only touch any broken-off
parts or the cut-off parts
wearing protective gloves,
since the torn / cut edges can
be very sharp.