Lukas LKS 31 - Manual (Page 17)

17
H
REMARK:
If you only want to change the blade arms, carry out the work up to step 6 and
step 11.
If you want to change the protection hose, carry out the work up to step 8 and
step 11.
CAUTION!
Don’t forget to apply LUKAS special grease to all sliding surfaces.
7. Fold in the lever elements (G).
8. Finally, remove the protection hose (H) from
the tool as shown.
9. Unfasten the screws (J) and remove them.
G
10. Slide the handle (K) towards the lever
elements to remove it and also remove the
washers (L) underneath.
11. Assembly is carried out in the reverse order.
J
L K