Lukas LKS 31 - Manual (Page 18)

18
9.3.2 Labels
All damaged and/or illegible labels (safety notices, type plate, etc.) must be renewed.
Procedure:
1. Remove damaged and/or illegible labels.
2. Clean the surfaces using acetone or industrial alcohol.
3. Attach new labels.
Ensure that you attach the labels in the right position. If you are no longer sure about this,
then please contact your authorised LUKAS dealer or LUKAS itself.
CAUTION!
The nut of the pivot bolt and the pivot bolt itself will be adapt together by a special
procedure, therefore they have only be changed as a set by usage of a new set!
Because of the special procedure an unscrewing of the nut while working will be
minimized and a resulting blade crack will be prevented.
The nuts can be unscrewed and thigtend up to 10 times without affecting the service
performance!