JUN-AIR JAir Dental Compressed Air System - Manual (Page 22)

22
CI-101A (Rev B) JUN-AIR Dental Compressed Air System User Guide
© 2011, JUN-AIR
We reserve the right to make any alterations which may be due to any technical improvements
Printed in the USA
INSTALLATION CHECKLIST
o
C heck system for shipping damage
o
Remove packaging materials
o
Verify installation kit components
o
Remove skid mounting hardware and re-attach nuts to shock mounts
o
Install intake filter assemblies
o
Relocate unit to operating location and place per “SITE REQUIREMENTS”
o
Attach pneumatic fittings and connections per “SITE REQUIREMENTS” and “INSTALLATION-
PLUMBING CONNECTIONS”
o
Install drain tubing to system and secure opposite end to floor drain
o
Attach electrical connections per “SITE REQUIREMENTS” and “INSTALLATION -ELECTRICAL”
o
Verify incoming line voltage is minimum of 208 V and maximum of 253 V
o
Turn on power to dedicated circuit and ensure unit starts. If not, refer to “TROUBLESHOOTING
GUIDE”
o
Check for system and operatory leaks per “SYSTEM CHECKS AND TESTS”
o
Check system pump-up and recovery times per “SYSTEM CHECKS AND TESTS”