Synergy 5223 - JK 4 Door B-Pillar Cage Kit User Manual
Page 10
17. At this time, it is a good idea to fit the harness bar (if planning to run it) and make
sure it fits correctly between the B-pillar tie in tubes. The factory sport bars vary
from Jeep to Jeep so be sure the harness bar fits with how the tie in tubes are tacked
in position. Adjust as needed to align notches.
18. When mocking up the harness bar, be sure it will be in a safe position to correctly
mount your shoulder belts to. Set the seat in a comfortable driving position for mock
up. Then follow the Crow diagram below to ensure proper placement.
For reference, see image 16.2 below for the measurements off our
Jeep when developing this cage kit. We measured 32” from the
floor plate to the bottom of the harness bar for proper mounting.