Synergy 8012-13 - Jeep JK Weld-On Front Track Bar Bracket - Manual (Page 7)

7. If you are mounting a steering stabilizer, mount the steering stabilizer bracket as
shown below. A few different mounting locations are shown; it will be up to you to
determine where exactly you want to mount the bracket. If you are using a Fox
steering stabilizer, you will need to use one wide (7/16) and one narrow (5/16)
bearing spacer.
a) This is shown with the stock JK steering knuckles
b) This is one option if using Reid Racing high steer knuckles