Synergy 8095-01 - Jeep JK Front Track Bar Brace (RHD) User Manual
Page 4
Advertising
5) Next, align the holes in the steering box with the holes on the bracket and the
holes on the frame. Then, loosely install all 4 steering box bolts removed in step
o Note – apply a small amount of blue locktite to the threads of the steering
box bolts
6) Next, install the 1” long 7/16-14 UNC bolts provided in the kit as pictured below.
Use a flat washer under both the head of the bolt and under the stover nut. Orient
bolt as shown with the nut on the outside of the bracket.
Advertising