Synergy 8095-01 - Jeep JK Front Track Bar Brace (RHD) User Manual
Page 5
Advertising
7) Fully tighten bolts. Torque steering box bolts to 70 ft/lbs.
8) Torque the 7/16” bolts installed in step 6 to 70 ft-lbs.
9) Remove the stock TB bolt, reinstall front drivers side tire and lower vehicle onto
the ground.
o Align Track Bar and install the new 3.25” long 9/16-12UNC bolt provided
in the kit. Use a flat washer under both the head of the bolt and the stover
nut.
Advertising