Smittybilt 7700 Receiver Rack - Manual

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd,Compton CA 90220
Installation Instructions
Receiver Rack (Part # 7700)
Universal Application
NOTE: Carefully read entire instructions thoroughly before
attempting to install this part.
Parts Included Qty Tools Needed
2 “ Draw Bar 1 Ratchet
Racks 2 Socket Set
Curved Support Bars 2 Wrench Set
Connecting Plates 2
(Large) 10mm x 75mm Bolt 3
(Medium) 10mm x 25mm Bolt 4
(Large) 10mm Flat Washer 7
(Large) 10mm Lock Nut 7
(Small) 6mm x 18mm Bolt 12
(Small) 6mm Flat Washer 12
(Small) 6mm Lock Nut 12
CAUTION: Never exceed the tongue weight capacity of your hitch.
Never exceed the weight limit of the Receiver Rack (500 LB’s evenly distributed).
!