Snorkel PAX10-sn0001 - Manual (Page 21)

OPERATOR‟S, SAFETY & MAINTENANCE HANDBOOK
18
Section 6
TRANSPORT INSTRUCTIONS
Loading and unloading
When loading or unloading the machine, use
one of the methods as below.
When using a forklift to lift the machine,
ensure the forks are sufficiently inserted into
the forklift pockets in the base of the
machine. Safety decals applied to the
machine show the location of the forklift
pockets.
When using a tail lift to load or unload the
machine ensure that brakes are applied to
both castor wheels. Ensure that the capacity
of the tail lift is sufficient to handle the
machine. Take care when maneuvering the
machine on the tail lift.
When winching the machine onto or off a
vehicle, ensure that the winch is connected
to the winch point as shown below. Ensure
personnel are available to guide the
machine whilst the winch is in operation.
WARNING
NEVER ATTEMPT TO LOAD OR
UNLOAD THE MACHINE BY MANUAL
EFFORT ONLY, SERIOUS INJURY,
MACHINE OR PROPERTY DAMAGE
COULD RESULT.
Lifting
No lifting attachment points are provided on
the machine and therefore lifting of the
machine (e.g. with a crane or straps) is
prohibited.
Preparation for transport
Prior to transporting the machine on a
vehicle, ensure that the following
precautions are taken in order to avoid
damage to the machine or damager to the
transporting vehicle.
1. Ensure that the platform is fully lowered to
its rest position.
2. Ensure that loose items (e.g. control box,)
are secured to the platform.
3. Ensure brakes are engaged on both rear
castor wheels.
4. Secure the machine to the transport
vehicle using straps across the platform.