Snorkel PAX10-sn0001 - Manual (Page 4)

OPERATOR‟S, SAFETY & MAINTENANCE HANDBOOK
1
Section 1
DESCRIPTION
Introduction
This handbook provides information on the
safe operation of this work platform.
Operators should read and understand all of
the information contained within this manual
prior to operating the work platform.
The handbook contains several
warnings; these indicate situations
which if not avoided could result in
serious injury or death to persons, or
damage to the machine or property.
Additional copies of this handbook are
available from the manufacturer at the
address below.
Information contained in this handbook is
based on the latest product information at
time of publication. Operate a policy of
continuous improvement and therefore
reserve the right to make product changes at
any time without obligation.
Description
This is a scissor lift type work platform,
which is maneuvered manually into work
positions and elevated and lowered using an
electro ‐hydraulic control system.
The standard machine includes the following
standard features
• 240 kg safe working load
• 3.73 / 4.5 /5 meter working height
• 1.62 / 1.64 meter stowed height
• Easily maneuverable
• Pass through standard doors
• Simple operation
• Steel guard rails
• Non‐slip platform
•
Swivel wheels
• Brakes on two wheels
• Manually operated stabilizers
• Integral battery charger
• Emergency lowering facility
• Easily transportable
• Low maintenance
• Complies with EN280:2001