IKA ULTRA-TURRAX Tube Drive - Manual (Page 13)

• BMT-50-S Tube for grinding with stainless balls 50 ml
• BMT-50-S-M Tube for grinding with stainless balls 50 ml,
with pierceable membran
• BMT-50-S-M-gamma Tube for grinding with stainless balls 50 ml,
-sterilized, with pierceable membran
• BMT-20-G Tube for grinding with glass balls 20 ml,
with pierceable membran
• BMT-50-G Tube for grinding with glass balls 50 ml
• BMT-50-G-M Tube for grinding with stainless balls 50 ml,
with pierceable membran
• ST-2-Adapter Adapter UTTD - ST-2
• TC-20-M Tube cover 20 ml
with pierceable membran
• TC-50 Tube cover 50 ml
• TC-50-M Tube cover 50 ml
with pierceable membran
13 032008
The appliance is maintenance-free.
For cleaning disconnect the main plug.
Only use cleansing agents which have been recommended by IKA
Use to remove:
Dyes
isopropyl alcohol
Construction materials water containing tenside/ isopropyl alcohol
Cosmetics
water containing tenside/ isopropyl alcohol
Foodstuffs water containing tenside
Fuels water containing tenside
- Do not allow moisture to get into the appliance when cleaning
- Wear protective gloves during cleaning the devices.
- Before using another than the recommended method for clean-
ing or decontamination, the user must ascertain with IKA that
this method does not destroy the instrument.
Spare parts order
When ordering spare parts, please give:
- Machine type
- Manufacturing number, see type plate
- Item and designation of the spare part,
see www.ika.net.
Repair
In case of repair the device has to be cleaned and free from any
materials which may constitute a health hazard.
If you require servicing, return the appliance in its original packa-
ging. Storage packaging is not sufficient. Please also use suitable
transport packaging.
Maintenance