IKA EUROSTAR 100 digital - Manual (Page 3)

3
Contents
Page
EC-Declaration of conformity 3
Explication of warning symbols
3
Safety instructions 4
Correct use 6
Unpacking 6
Drive 6
Motor protection
6
Speed – normal operation 7
Speed – overload operation 7
Output shaft 7
Speed display 7
Commissioning 8
Securing 8
Switching on the instrument
9
Maintenance and cleaning 9
Error codes 10
Warranty 10
Accessories 11
Permitted IKA
® stirrer tools 11
Technical data 12
EN
EC-Declaration of conformity
We declare under our sole responsibility that this product corresponds to the regulations 2006/42/EC and 2004/108/EC
and conforms with the standards or standardized documents EN 61010-1, -2-051; EN ISO 12100-1, -2; EN 60204-1
and EN 61326-1.
Explication of warning symbols
General hazard
This symbol identifies information that is of vital importance for safeguarding your health
and safety. Disregarding this information can lead to health impairment and injuries.
This symbol identifies information that is of importance for the technically correct functioning
of the system. Disregarding this information can result in damage to the instrument or to system
components.
This symbol indicates information which is important for ensuring that the operations of the
instrument are performed efficiently and for using the instrument. Failure to observe this
information can result in inaccurate results.
DANGER
CAUTION
WARNING
Source language: German