IKA EUROSTAR 200 digital - Manual (Page 11)

11
Technical data
Speed range I (high torque)
Speed range II (high speed)
rpm 0/6-400
0/30-2000
Speed setting Stepless
Speed display 7-Segment LEDs
Speed setting accuracy rpm ±1
Speed measurement deviation Speed < 300 rpm: ±3 rpm
Speed > 300 rpm: ±1%
Max. torque at stirrer shaft Ncm Range I: 200
Range II: 40
Max. stirring quantity (water) ltr 100
Max. viscosity mPas 100000
Permitted on time % 100
Nominal voltage VAC 230±10% (EURO)
115±10% (USA)
Frequence Hz 50/60
Max. input power W 130
Max. output power at stirring shaft W 84
Protection type acc. to DIN EN 60529 IP 40
Protection class I
Excess voltage category II
Contamination level 2
Protection at overload Yes/motor current limitation
Fuse (on mains plate) A T 4 A (IKA ® Ident. No. 2585100)
Ambient temperature °C +5 to +40
Ambient humidity (rel.) % 80
Drive Brushless motor
Clamping chuck – clamping range mm 0,5-10
Hollow shaft internal diameter mm 10,3
Extension arm (ØxL) mm 16x220
Housing Coated aluminium casting and thermoplastic plastic
Dimensions (WxDxH) (without extension arm) mm 91x209x274
Weight (with extension arm and clamping chuck) kg 4,6
Operation at a terrestrial altitude m max. 2000
Subject to technical changes!