Eppendorf TransferMan4 m - Manual (Page 69)

Operation
TransferMan ® 4m
English (EN)
69
6.15.2 Execute the PiezoXpert function
Prerequisites
• A PiezoXpert is connected.
1. Activate Synchr. PiezoXp.
2. Set PiezoXp. speed .
3. Set PiezoXp. dist.
4. Select PiezoXp. axial .
5. Close the menu.
6. Trigger the function with Channel A on the PiezoXpert.
• The function is executed.
6.16 Installation function
The function provides settings for making fine adjustments to the motor module and the
control board. Parameters in the
Installation menu override identical softkey functions.
6.16.1 Installation menu and parameters
Abb. 6-6:Menu – Installation
Fig. 6-6: Menu – Installation
PiezoXp. axial Axial movement on or off
(corresponds to the set
injection angle)
On = movement in the X and
Y-axis.
Off = movement in the
X-axis ON/OFF – OFF
Parameter Value Range of values Increment Standard