Eppendorf InjectMan 4 - Manual (Page 56)

Operation
InjectMan
® 4
English (EN)
56
6.5 Changing the sample
6.6 Changing the speed range
6.6.1 Changing parameters using the selection dial
CAUTION! Risk of crushing between the modules
The modules automatically move in all spatial axes.

Do not reach into the movement range of the modules.
1. Press the home key to move the capillary
out of the working range.
2. Swing the X-module backwards.
3. Change the sample.
4. Swing the X-module back.
5. Press the home key to move the capillary
back into the working range.
1. Press the key for the desired speed range
on the control panel.
2. Turn the selection dial to change the
speed.
menu
fine
fine
coarse