Eppendorf InjectMan NI 2 - Manual (Page 9)

62
The Eppendorf InjectMan ® NI 2 micromanipulator is made up of three components:
– Control board
– Module unit
– Mains power supply unit
Fig. 1: InjectMan ® NI 2 micromanipulator, without mains power supply unit
Module unit for right side mounting (without tool mount)
The module unit can be mounted at the left or right on any commonly used microscopes by way
of an adapter.
The module unit comprises the motor unit for horizontal movement (X, Y axis,
X/Y module) and the axial motor unit (A axis). The injection angle is adjusted manually using the
angle guide. By means of the angle setting and appropriate mounting, injection angles between
60° and 30° are possible.
Vertical movements (Z movements) are executed by the interaction between the A and X axes.
3.1 Components
10
10
5
5
Menu
Standby
Limit
Coarse
Fine
Pos 1
Pos 2
Home
Axial
In je c tM
a n N I 2
3.2 Module unit
Description
3 Description
3
03_Gerät_en.fm Seite 62 Donnerstag, 6. Dezember 2012 1:29 13