Eppendorf C-76 Classic Water Bath Shaker - Manual (Page 11)

11
New Brunswick Operating manual
3.3 Drain Valve Connection
The unit should be placed in close proximity to an open drain.
It is recommended that a 3/8” ID hose be connected to the
DRAIN VALVE for draining
the bath. The DRAIN VALVE is located near the rear of the unit, on the side opposite
the ON/OFF SWITCH (see Figure 1 below).
Figure 1: Top View
3.4 Cooling Coil Connections
If your water bath is equipped with an optional COOLING COIL , prepare the coil for
operation:
1. Remove the rear panel of the WATER BATH ASSEMBLY from the unit (see Figure
2).
DRAIN
VALVE
ON/OFF
SWITCH