Eppendorf AF2200 Plate Reader - Manual (Page 9)

Installation
Eppendorf ® PlateReader AF2200
English (EN)
9
3 Installation
3.1 Install software
You must have administrator rights to install the software.
Install the software before connecting the PlateReader AF2200 to the computer.
1. Insert the CD with the software into the CD-ROM
drive.
2. Start the installation by executing the Setup file.
3. Press the OK button to continue the installation.
4. Press the Next button to continue the installation.
The Next button can be used to confirm the current installation step and continue the
installation.
The
Back button brings you back to the previous installation step.
The Cancel button can be used to abort the installation.