JLG T500J Service Manual - Manual (Page 16)

SECTION 1 - SPECIFICATIONS
1-2 – JLG Lift – 3121200
1.5 ENGINE
Battery
1.6 DIMENSIONAL DATA
1.7 LUBRICATION
Hydraulic Oil
NOTE: Hydraulic oils must have anti-wear qualities at least
to API Service Classification GL-3, and sufficient
chemical stability for mobile hydraulic system ser-
vice. JLG Industries recommends Mobilfluid 424
hydraulic oil, which has an SAE viscosity index of
152.
NOTE: When temperatures remain consistently below 20° F.
(-7° C.), JLG Industries recommends the use of
Mobil DTE13.
Aside from JLG recommendations, it is not advisable to
mix oils of different brands or types, as they may not con-
tain the same required additives or be of comparable vis-
cosities. If use of hydraulic oil other than Mobilfluid 424 is
desired, contact JLG Industries for proper recommenda-
tions.
Table 1-5. Battery Specifications
BCI Group Size 51R
Cranking Performance 550 amps @ 32 °F (0°C)
450 amps @ 0 °F (-18°C)
Reserve Capacity 80 minutes @ 32 °F (0°C)
Table 1-6. Dimensional Data
Overall Length
Surge Brake, 2" ball
Electric Brake
Surge Brake Combination
26 ft 9.75 in (8.2 m)
26 ft 8 in (8.1 m)
26 ft 10.25 in (8.2 m)
Overall Height ANSI 6 ft 7.25 in (2 m)
Overall Height CE 7 ft 0.5 in (2.1 m)
Overall Width - (outriggers up) 5ft 10.25 in (1.8 m)
Overall Width (outriggers down - ANSI) 12 ft 7.75 in (3.9 m)
Overall Width (outriggers down - CE) 13 ft 5.25 in (4.1 m)
Table 1-7. Hydraulic Oil
Hydraulic System
Operating
Temperature Range
S.A.E. Viscosity
Grade
+0° to + 180° F
(-18° to +83° C)
10W
+0° to + 210° F
(-18° to +99° C)
10W-20, 10W30
+50° to + 210° F
(+10° to +99° C
20W-20
Table 1-8. Mobilfluid 424 Specs
SAE Grade 10W30
Gravity, API 29.0
Density, Lb/Gal. 60°F 7.35
Pour Point, Max -46 °F (-43°C)
Flash Point, Min. 442 °F (228°C)
Viscosity
Brookfield, cP at -18°C 2700
at 40° C 55 cSt
at 100° C 9.3 cSt
Viscosity Index 152