JLG 40H Parts Manual - Manual (Page 257)

3120241 2-193
S
E
C
T
I
O
N
2
T
U
R
N
T
A
B
L
E
SECTION 2 TURNTABLE
68 Guard, Switch Options: 4
Not Required All Machines Built Prior To May 1994
4060802 All Machines Built May 1994 To Present
69 Cover, Switch - Red Options: 1
Not Required All Machines Built Prior To May 1994
4360141 All Machines Built May 1994 To Present
70 Duct Options: 11 in.
1840002 All Machines Built Prior To May 1994
Not Required All Machines Built May 1994 To Present
71 Decal - Relay Schematic Options: 1
1700790 All Machines Built Prior To May 1994
Not Required All Machines1 Built May 1994 To Present
72 Nameplate - Rotate and Level Options: 1
3251880 All Machines Built Prior To May 1994
Not Required All Machines Built May 1994 To Present
GROUND CONTROL BOX AND HARNESS ASSEM-
BLIES
Ref.
101 Not Used
102 Not Used
103 Harness Options: A/R
4920845 All Machines Except Deutz F3L1011 Machines
(See Section 7) Deutz F3L1011 Machines
104 Harness Options: A/R
4921131 All Machines Except Deutz F3L1011 Machines
(See Section 7) Deutz F3L1011 Machines
105 Control Box Assembly Options (Includes Items 1-72): 1
0239219
Deutz F2L511/F3L912, Ford and Wisconsin (Prior to
May 1994)
0860913
Deutz F2L511/F3L912, Ford and Wisconsin (May
1994 to Present)
0860710 Deutz F3L1011 (Prior to May 1994)
0860935 Deutz F3L1011 (May 1994 to Present)
106 1060016 Cable, Electrical - 16/3 12 ft.
GROUND CONTROL INSTALLATION (STANDARD
PARTS)
Ref.
201 Not Used
202 Not Used
203 Not Used
204 2420009 Gauge, Hourmeter 1
205 Not Used
206 0641406 Bolt 1/4"-20NC x 3/4" 6
207 4761400 Lockwasher 1/4" 6
208 3311401 Nut, 1/4"-20NC 6
209 Not Used
210 Not Used
211 0100020 Sealant, Pipe A/R
FIGURE 2-48. GROUND CONTROL COMPONENTS INSTALLATION (MACHINES WITH HYDRAULIC
CONTROLS) (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.