JLG 510AJ Parts Manual - Manual (Page 125)

3121182 510AJ 2-79
SECTION 2 TURNTABLE
FIGURE 2-15. 2500W GENERATOR INSTALLATION - PERKINS MACHINES (OPTIONAL)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref. Note: For Module (with/without UGM) Identification, refer to
Revision Log page A.
Ref. Note: All Romanian Built Machines are equipped with UGM.
Ref. GENERATOR INSTALLATION
Ref. Without UGM
1001097325 Ref. 110V/60Hz Generator D
1001100944 Ref. 110V/50Hz Generator B
1001097324 Ref. 220V/50HZ Generator (Prior to S/N 1300006619) B
1001100943 Ref. 220V/50HZ Generator (S/N 1300006619 to Present) B
Ref. With UGM
1001111285 Ref. 110V/60Hz Generator A
1001100944 Ref. 110V/50Hz Generator B
1001100943 Ref. 220V/50HZ Generator B
Ref. Note: Refer to Sky Power Accessories Manual p/n 3124242
for the Miller 7500W Generator.
1 0100011 A/R Compound, Locking
2 0200742 1 Arm, Adjusting
3 1 V-Belt Options:
0480121 110V/60Hz
0480121 110V/50Hz (Prior to S/N 1300006619)
0480120 110V/50Hz (S/N 1300006619 to Present)
0480120 220V/50Hz
4 0641404 1 Bolt 1/4in-20NC x 1/2in
5 0641508 1 Bolt 5/16in-18NC x 1in
6 0641772 1 Bolt 7/16in-14NC x 9in
7 0701217 3 Bolt M12 x 45mm
8 0962449 1 Bushing
9 1 Generator and Control Box Assembly Options:
2460055 110V/60Hz
2460049 110V/50Hz Generator Only
2460056 220V/50Hz (Prior to S/N 1300006619)
1001100321 220V/50Hz Generator Only (S/N 1300006619 to Present)
9A 7012558 1 110V/60Hz Replacement Generator
2460049 1 110V/50Hz Replacement Generator
1001100321 1 220V/50Hz Replacement Generator
Ref. Note: Replacement Generators come standard with
p/n 3580134 Pulley. This Pulley may not be correct
for all applications. Refer to Pulley options below.
7026199 1 110V/60Hz Armature with Slip Rings
70000122 1 110V/50Hz Armature with Slip Rings
70000123 1 220V/50Hz Armature with Slip Rings
7020109 4 Holder, Brush
7020108 4 Brush
7012513 4 Cap, Brush Holder
7012514 1 Fan
7020190 2 Bearing
7020110 1 End Bell, Front
7020111 1 End Bell, Rear