JLG 510AJ Parts Manual - Manual (Page 181)

3121182 510AJ 4-3
SECTION 4 PLATFORM
FIGURE 4-1. PLATFORM INSTALLATION
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref. PLATFORM ASSEMBLY WITH GATE
Ref. All Belgium Built Machines & Romanian Built Machines Prior
to S/N E300001002
Use 1001144025 Ref. 6ft (1.83m) with No Mesh (was p/n 3510832) B/L
Use 1001144026 Ref. 5ft (1.52m) with No Mesh (was p/n 3510831) B/L
Use 1001144027 Ref. 4ft (1.22m) with No Mesh (was p/n 3510830) B/M
Ref. Romanian Built Machines S/N E300001002 to S/N E300001114
1001144025 Ref. 6ft (1.83m) with No Mesh B
1001144026 Ref. 5ft (1.52m) with No Mesh B
1001144027 Ref. 4ft (1.22m) with No Mesh B
Ref. Note: Original Equipment platform may have been replaced
with Service Replacement platform. Identify platform
before ordering parts.
Ref. Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See Section 10 for Mesh Installations.
Ref. Note: Replacement Decals Must Be Ordered Separately -
See Section 8.
1 Not Used
2 2080040 16 Fastener, Huck
3 2600281 2 Hinge, Self-Closing
4 2940074 1 Latch
5 3311001 4 Nut #10-24NC (Belgium Built Machines Prior to S/N
1300000311)
6 See Note 1 Platform Weldment (Note: Not Available - Purchase
Complete Assembly
7 3520072 1 Cap-Plug
8 4 Hardware Options:
3900205 Screw #10-24NC
3820020 Rivet, Pop
9 4751000 8 Flatwasher #10 Regular (Belgium Built Machines Prior to
S/N 1300000311)
10 4761000 A/R Lockwasher #10 (Belgium Built Machines Prior to
S/N 1300000311)
11 1 Gate Weldment Options:
4846452 Gate for Original Equipment Platform p/n 3510830,
3510831, 3510832
1001144629 Gate for Service Replacement Platform p/ns 1001144025,
1001144026, 1001144027
12 3520198 2 Plug, Square Tube
13 0100011 A/R Compound, Locking (Belgium Built Machines Prior to S/N
1300000311)