JLG 800A_AJ Parts Manual - Manual (Page 16)

1-10 800A 800AJ 3121854
SECTION 1 FRAME
108 2 Drive Motor Assembly Options:
Use 3160347 2 2WD Rear (SN 0300083332 to SN 0300098925 p/n was
3160308 - See DRIVE MOTOR ASSEMBLY (4 BOLT
ASSEMBLY) for Breakdown) (SN 0300098925 to
SN 0300140000 p/n 3160347 - See DRIVE MOTOR
ASSEMBLY (5 BOLT ASSEMBLY) for Breakdown)
Use 3160348 4 4WD Front & Rear (SN 0300083332 to SN 0300098644 p/n
was 3160266 - See DRIVE MOTOR ASSEMBLY (4 BOLT
ASSEMBLY) for Breakdown) (SN 0300098644 to
SN 0300140000 p/n 3160348 - See DRIVE MOTOR
ASSEMBLY (5 BOLT ASSEMBLY) for Breakdown)
109 3300007 20 Nut, Wheel
110 to 112 Not Used
113 4891800 4 Flatwasher, 1/2in Hardened
114 4892000 16 Flatwasher, 5/8in Hardened
Ref TIRE AND WHEEL INSTALLATIONS
0270886 Ref 15-625 Foam-Filled A
0270888 Ref 18-625 Foam-Filled A
0258399 Ref IN445/55D19.5 Foam-Filled B
0274177 Ref IN385/65D19.5 Foam-Filled A
0271085 2 15-625 Foam-Filled Left Side
0271086 2 15-625 Foam-Filled Right Side
0271090 2 18-625 Foam-Filled Left Side
0271091 2 18-625 Foam-Filled Right Side
0258333 2 IN445/55D19.5 Foam-Filled Left Side
0258334 2 IN445/55D19.5 Foam-Filled Right Side
4520348 2 IN385/65D19.5 Non-Marking Foam-Filled Left Side
4520347 2 IN385/65D19.5 Non-Marking Foam-Filled Right Side
Ref Note: Assemblies may require ballast/foam filling to
manufacturer’s specifications prior to installing on a
machine. Refer to Operation & Safety or Service &
Maintenance Manuals. Purchase individual tire and/or rim
only if able to foam fill tire & wheel assembly, otherwise,
purchase complete assembly,
201 Not Required 1 Decal
202 1 Tire Options:
4520252 15-625
4520253 18.625
4520205 IN445/55D19.5
4520242 IN385/65D19.5 Non-Marking (15 x 19.5)
203 Not Required 1 Valve, Air
204 1 Rim, Wheel Options:
4860224 13 x 24.5
4860225 15 x 24.5
4860188 14 x 19.5
FIGURE 1-2. TIRE AND WHEEL INSTALLATIONS (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.