JLG 800A_AJ Parts Manual - Manual (Page 193)

3121854 800A 800AJ 4-7
SECTION 4 PLATFORM
FIGURE 4-2. PLATFORM COMPONENTS INSTALLATION (SIDE ENTRY PLATFORM)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref PLATFORM ASSEMBLIES:
Use 1001144023 Ref 8ft (2.44m) with No Mesh (was p/n 3510822) B/H
Use 1001144024 Ref 6ft (1.83m) with No Mesh (was p/n 3510833) B/G
Use 1001144027 Ref 4ft (1.22m) with No Mesh (was p/n 3510830) B/K
Ref Note: Original Equipment platform may have been replaced
with Service Replacement platform. Identify platform
before ordering parts.
Ref Note: Replacement Decals Must be purchased separately -
See DECAL SECTION.
Ref Note: When replacing 8ft/2.44m platform with Soft Touch
option, new Soft Touch Rail p/n 4846673 must be
purchased to accommodate limit switch locations.
Ref Note: When replacing platform on machines with
SkyCutter option, new bracket p/n 1001145405 must be
purchased to accommodate SkyCutter components.
1 0100040 AR Sealant, Adhesive (SN 0300069000 to SN 0300073454)
2 2080040 16 Fastener, Huck
3 2600281 2 Hinge, Self-Closing
4 2940074 1 Latch
5 3311001 4 Nut #10-24NC (SN 0300069000 to SN 0300077328)
6 See Note 1 Platform Weldment (Note: Not Available - Purchase
Complete Platform Assy.)
7 3520072 1 Cap-Plug
8 4 Screw Options:
3911008 Screw #10-24NC x 1in (SN 0300069000 to SN
0300076404)
3900205 Screw #10-24NC x 5/8in (SN 0300076404 to
SN 0300077361)
3820020 Rivet, Pop (SN 0300077361 to SN 0300140000)
9 4751000 8 Flatwasher #10 (SN 0300069000 to SN 0300077328)
10 1 Gate Weldment Options:
4846452 Gate for Platform p/ns 3510822, 3120830 & 3510833
1001144629 Gate for Platform p/ns 1001144023, 1001144024 &
1001144027
11 3520198 2 Cap-Plug
12 0100011 AR Compound, Locking (SN 0300073454 to SN 0300077328)
13 4761000 4 Lockwasher #10 (SN 0300073454 to SN 0300077328)
Ref CONSOLE BOX INSTALLATION
0271941 Ref SN 0300069000 to SN 0300137975 B
1001108736 Ref SN 0300137975 to SN 0300139070 B
1001114446 Ref SN 0300139070 to SN 0300140000 C
101 0641406 4 Bolt 1/4in-20NC x 3/4in
102 0641408 3 Bolt 1/4in-20NC x 1in
103 0641610 4 Bolt 3/8in-16NC x 1-1/4in