Boom – JLG TF6-42 Parts Manual User Manual
Page 36
Advertising
BOOM
TF6-42
91504001
2-8
Figure 2-4 Bearing Pads, Spacers & Shims, (Second Boom Section)
24
22
4
21
6
3
2
3
2
7
25
5
10
9
8
11
12
13
14
15
22
26
23
22
16
3
2
3
1718
10
20
19
27
1
SERVICE NOTES:
1. Add bearing pad shims & spacers as required to shim boom to
within 1/16” of a tight fit. Whenever a shim is used with a pad, a
spacer must be inserted between pad & shim. No pads shall sit
directly on slotted surface of shims.
2. The length of pad bolts depend on the amount of shims used.
Bolt cannot extend past chamfer on bearing pad.
3. Add grease, (14404549), to all bearing pad slide areas.
4. Use loctite, (14403364), on all bolt threads.
Advertising