JLG 3246ES Operator Manual - Manual (Page 108)

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6-16 – JLG Lift – 3121165
4. Wheel nuts should be torqued after the first 50 hours of
operation and after each wheel removal. Check torque
every 3 months or 150 hours of operation.
6.1 SUPPLEMENTAL INFORMATION
The following information is provided in accordance with the
requirements of the European Machinery Directive 2006/42/
EC and is only applicable to CE machines.
For electric powered machines, the equivalent continuous A-
Weighted sound pressure level at the work platform is less
than 70dB(A).
For combustion engine powered machines, guaranteed
Sound Power Level (LWA) per European Directive 2000/ 14/EC
(Noise Emission in the Environment by Equipment for Use
Outdoors) based on test methods in accordance with Annex
III, Part B, Method 1 and 0 of the directive, is 109 dB.
The vibration total value to which the hand-arm system is
subjected does not exceed 2,5 m/s2. The highest root mean
square value of weighted acceleration to which the whole
body is subjected does not exceed 0,5 m/s2.
Table 6-9. Wheel Torque Chart
TORQUE SEQUENCE
1st Stage 2nd Stage 3rd Stage
20-30 ft lbs
(28 - 42 Nm)
65-80 ft lbs
(91 - 112 Nm)
105 -120 ft lbs
(142 - 163 Nm)