JLG 3246ES Operator Manual User Manual
Page 38
Advertising
SECTION 3 - USER RESPONSIBILITIES AND MACHINE CONTROLS
3-8
– JLG Lift –
3121165
NOTE:
ANSI/CSA/AUS machines are equipped with a tilt interlock
which cuts out drive and lift up functions when chassis is
on a slope greater than what is allowable for the machine
and the platform is elevated.
DO NOT “LOWER” WITHOUT COMPLETELY RETRACTING THE PLATFORM
EXTENSION.
DO NOT OPERATE MACHINE IF HIGH DRIVE SPEED OPERATES WHEN PLAT-
FORM IS RAISED ABOVE THE STOWED POSITION.
Advertising
This manual is related to the following products: